|
Extras
|
Home \ Guides & Articles \ Custom Grill
Custom Grill
8/21/04
This is the Before and after shot I think it turned out very well. Using a Custom designed Acrylic Rill Made by Pololu They did an awesome Job there and very reasonable pricing. anywhere from 4 to 8 dollars a grill pending materials and cuts of course.
A Better look at the grill ordered
First step was cutting out the old emblem in the center of my original grill cover. Using a heave pair of metal snips it was very easy. best thing to is mount the grill on something to make it easier to work with specially for the grinding steps.
Using a grinding tool I got the Craftsman 49.99 special grind down any access metal to a good job the smoother the better. This might take a few bits took me 3 I believe.
Next is the finish using a polishing kit go around the grill thoroughly making sure no access metal or scratches from grinding are left. Again this took 3 abrasive polishing heads so be for warned.
Next is fine polishing for texture. basically your looking to make it shine.
Only thing left is mounting. Using a longer screw and rubber washers as spacers It should turn out ok and leave a space between the metal ring and the acrylic grill.
And a special Thanks to Jan from Pololu he helped me out tunes to get this grill correct.
And there you have it for tips on cutting holes please check out any of these links
|
Good Links Other Good Links
Mod Sites & Guides
|
|
|
New Stuff 12-23-04 reLANtless Dec. LAN Party Photos 11-24-04 CD Stealth Mod By Jess 10-28-04 UV Pen Mod By Lee
10-23-04 Red CCFL Fan Kit Review 10-14-04 Corsair XLPro XMS3200 Benchmark Results 10 -04-04 ATI RADEON 9600 XT 128 Meg
09-30-04 ATI Comparison 9100Pro Vs. 9600XT 3DMark200l & 3DMark0309-27-04 ProLink GeForce FX 5700 LE 256Meg card
09-22-04 Message Board Check it Out!!!
09-19-04
ThermalRight NB-1C
Chip Set Cooler
09-17-04
09-16-04 Pololu Custom Acrylic Grills all Laser Cut
09-14-2004 ProLink GeForce FX 5700 LE 256Meg DDR Benchmarks 3DMark03 09-01-2004
Project
Sound Wave Website updated
08-25 2004 |
Manufacturers
|
|
Copyright © 2004 Marns
CDA
|
Affiliates
Want to Be an Affiliate? Click |
|
